Wire cutting technology began in the late 1950s and has now entered a new era of wire-cutting molds. According to the different running speed of the wire, the WEDM machine can be divided into two categories; one is high-speed reciprocating motion, the general wire speed is 8-10M/S, and the wire can be reused. This type of machine tool has a high pr....
News
2019-10-14 08:40:25
1. Installation of parts and selection of fixtures (1) Basic principles of positioning and installation 1) The benchmarks for design, process and programming calculations should be uniform 2) Reduce the number of clamping times, and process all the surfaces to be processed after one positioning and clamping 3) Avoid using the manual adjustment ....
2019-11-25 09:07:53
The product yield rate is the life of the injection molding enterprise. However, with the long-term operation of the equipment, various dirt condenses on the mold core surface and the mold cooling water path, which not only damages the service life of the mold, but also makes the product yield rate difficult to protect. It has a huge impact on prod....
